Error Code 80073701 Windows Fix

Many users have reported seeing a notification about the same “80073701” error related to updating their Windows OS. That is why the following article has been created – with the intent to assist the affected users in resolving this issue.

Origin of the issue:

Whenever you are trying to apply an update to your Windows OS, an error notification is generated (containing the “80073701” error code) and the update doesn’t go through. Our recommendation is attempt to perform the instructions below for solving this problem.

Error Code 80073701 Windows Fix

Possible solutions:

  1. First of all, you need to try rebooting the Windows Update Components. Then you should check and see whether you can set them up. You can do that by running the Windows Update Diagnostic and follow the instructions there. If you are unable to automatically do that, please check the steps below for more details on how to do that in a manual way.

When it comes to resetting the Windows Update Components in a manual way

Sometimes performing a reset of the Windows Update Components could result in resolving the problem. By restarting these components you will fix the corrupted ones among them. Then you might be able to apply an update successfully. If you want to restart  the Windows Update Components, please go with the instructions below:

Open Command Prompt with administrator’s rights.

Immediately after the command prompt is generated, you should put an end to BITS, MSI Installer, Windows Update service and Cryptographic. Do that by simply writing the following commands into the command prompt window. Don’t skip pushing Enter as soon as every single command has been entered to terminate the services above.

-net stop wuauserv

-net stop cryptSvc

-net stop bits

-net stop msiserver

Alter the names of the SoftwareDistribution and Catroot2 folders. Apply the commands below into the command prompt in order to change the names of these folders.

– ren C:\Windows\SoftwareDistribution SoftwareDistribution.old;

– ren C:\Windows\System32\catroot2 Catroot2.old;

As soon as you are finished, just restart the processes and services that you had stopped in step №2 in the previous paragraphs. For that purpose enter the following commands into the command prompt:

-net start wuauserv

-net start cryptSvc

-net start bits

-net start msiserver

Leave the command prompt

Reboot your device. Then try to run the desired update.

2. Try to solve the issue with the System Update Readiness Tool.

So, all you have to do is to open this program (checksur.exe) and install Service Pack 1. In order to help you complete that, we have prepared the small guide below.

-Browse the web and download the executable file mentioned above from its provider’s web page. Then select Open. As soon as the Windows Update Stand Alone Installation Wizard appears, click on the button saying Yes. Perform the installation process by closely following the instructions in the wizard and select Close to finish it. Then click the Start button. You will see a search box, write cmd there. Then the result from the search will be shown – choose cmd.exe.

– Enter Command Prompt. Inside it, enter scf/scannow.
untitled
Hit Enter and wait until the scanning is done. Then again click on the Start button. In the recently appeared search box enter Windows Update Stand Alone. Select Windows Update Stand-Alone Installer from the results. Choose YES, then complete the installation process and finish it by selecting Close. As soon as the scan has been performed, try installing Service Pack 1 again. If the steps above don’t work for you, proceed with the ones below.

  1. Maybe removing the unused language packs will do the trick

To get rid of old and useless language packs, follow the steps below:

-Go to Control Panel. Select the Clock, Language and Region Menu.

region_control-panel

There you will notice an Install/Uninstall languages feature. Click on it, then from the generated list select the language packs that you rarely or never use and continue by hitting Next.

– Immediately after you have uninstalled these packs, you should be capable of installing Service Pack 1. If you still get the error message, stay calm and try our next potential solution below.

  1. These manual methods should help you install what you need to install

Make sure all the running programs and apps are terminated. Put the Windows 7 DVD into your drive. When the SetUp window comes up, select Install Now.

7_windows_dvd
In case your OS is not capable of recognising the DVD, go on with the following steps:

Hit Start, then enter Drive:\setup.exe in the search box. Choose Setup.exe from the Software programs record. When the corresponding window pops up, from the options inside it proceed with the Install Now one. It is also recommended that you go online for detecting the necessary and most up-to-date updates that are available. For that purpose enter CD key when prompted. 
From the list of the operating systems, choose yours and the updates that fit it. Simply select YES to agree with the Microsoft Software License Conditions. On you monitor you will see many options for installation. Choose Upgrade from them. As soon as the installation has been finished, simply reboot your device.

– Finally you should be able to incorporate Service Pack 1 into your PC.

We hope that the above guide helped you successfully resolve your current issues.

How to Fix “Unknown Device” in Windows 7/10

The following guide is designed to provide a fix for the “Unknowns device” error that appears in the Device Manager. The fixes in the guide will work for all Windows versions.

Lately there have been many reports of errors related to “unknown device”. The message for the unrecognized device pops up in the Device manager. This is the tool responsible for identifying all the connected hardware. It is also the component that manages the drivers installed on your PC – it updates them and installs them, this tool even removes them. What’s more, it enables and disables particular devices upon your request at any given time. The article below is focused on solving this problem and applies to all versions of Windows.

Possible origin of the issue

Sometimes when you connect a device to your computer, a notification saying that this device is unknown appears on your monitor in the Device Manager. If you notice a yellow exclamation mark in front of the device name, it means that your operating system is unable to identify a given device or it is unable to detect the necessary driver for it. In most of the cases, a device that is regarded as unknown is totally useless.  

1_article_12

Fortunately, this issue can be solved by manually looking for and installing the driver for the unrecognized device. Usually after doing that, you will be able to use the device and the error notification will no longer pop up.

How To Fix “Unknown Device” Error in Windows 7/10

Potential solution: the device driver could be found using the Hardware ID

Load the Device Manager by hitting the Windows key on your keyboard and writing Device Manager. Then you have to open the displayed result of your search request. Usually, a list of all the devices connected to your computer will be generated. There you will see yellow exclamation marks marking the Unknown Device(s).

2_article_12

As soon as you have detected the device that Windows refuses to recognize, right-click on it. A dropdown menu will appear. Go with Properties from there. Choose the Details tab in the window that is displayed. After that, go to Hardware Ids from the Property menu.

The value that is put first is the Hardware ID of the device that you are trying to connect to your PC. Mark the ID and copy it. What you should do then is to search for it using its name online. Every piece of hardware has a unique hardware ID. It is normally used by the producer for identifying a particular device in the contemporary ocean of hardware. Luckily, you can do the same yourself and find the device you are looking for. The result of the online search should contain your device and its manufacturer. From the device producer’s web page you can download the right driver for your particular OS.

Once you have downloaded the necessary driver(s), go to your Downloads Directory. There you will see the setup file that you need and you can start installing it. Follow all the steps of the installation wizard closely.

3_article_12

As soon as you have finished the installation process, restart your machine in order to let it accept the changes you have made. After doing that, your device should have become functional and no error should appear.

A message in the Device Manager stating that a device you would like to use has not been recognized could really bother you. However, usually this issue is not serious or troubling. In some cases simply rebooting your system might help. Sometimes you have to install the needed device drivers yourself, which is more likely to resolve the error. Our advice is to perform the steps above to fix your problem. In case they do not work in your case, please, write to us and we will look for a way to personally help you. If you have found a different, but working solution yourself, don’t hesitate to share it with us. We will be glad to include it in our article and help even more struggling users. We hope you will find the article and the guide attached to it helpful and detailed enough.

“Failed to Create KVP sessions string 0x8007007a” Error Fix

“Failed to Create KVP sessions string 0x8007007a” Error Fix

The following guide aims to provide a working solution for Error 0x8007007a, and specifically the “ailed to create KVP sessions string 0x8007007a” error.

Some of the most commonly reported issues by users nowadays are that they have experienced some disconnection from the RD servers of Windows. The article you are about to review on this page strives to deal with this very same problem. This unpleasant issue could be noticed under the ID: 1152 in the Event viewer. Such a disconnection of users is not a rare occasion, however, in this particular case, it has been concluded that the Remote Desktop Services on the RD server is also terminated simultaneously. As a result, the Remote Desktop Licensing Manager services on the server, which hosts this role, fails to do that.

Some of the reported reasons for this “failed to create KVP sessions string 0x8007007a” error could be the network equipment between the client connection and the server. Another reported one appears to be the authorizing of energy saving settings on the network cards from the client’s fixed issue, at the same time as another user is supposed to split out the number of RDSH hosts from the connection brokers. This happens because anything more than 500 users to HA connection broker farm does not work. Of course, there could be many more reasons for such an error. In the paragraphs below you will find detailed instructions of some possible solutions for this problem.

Solution №1: Try to fix the issue via using Local GPO

Microsoft TAM provides this particular potential solution. To achieve a positive result and have your problem solved, you should apply a local GPO to set up a Remote Desktop Licensing mode. Such an action could be helpful as it is concluded that Remote Desktop Licensing Manager Service fails on the server that hosts this role. Via the steps described below you can successfully apply a local GPO.

Select Start -> then choose Run -> enter gpedit.msc

Then continue with COMP configuration -> after that Admin Template -> then Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing

Only go with the specifically mentioned Remote Desktop Licensing Servers

Enter the Remote Desktop Licensing mode

Enter Command Prompt with administrator’s rights

developers_4

Write gpupdate /force 

article_9

Include the computer account of Connection broker and licensing server into the Domain Admins Group on the Domain Controller.

Include  the Computer and Network Service account in the RDS Endpoint server and RDS Management servers on the Session host server.

Restart the server.

Solution №2: Include write and read privileges in the“Terminal Server License Server” License Group:

Load Active Directory User and Computers.

Choose Domain and then hit Delegate Control.

You will see a “User and Groups” dialog box. In it select Add. Write Terminal Server License Servers. Finish this step by hitting OK.

Choose Next.

In the “Active Directory Object Type” box on your screen, mark the option “Only the following objects in the folder“.

Find and hit the “User objects” in that  particular list.

Continue with Next.

Depending on the OS which the domain controller is running, perform the following steps:

For the Windows Server 2008 or newer Schema forests:

In the Permissions dialog box that opens,put a check only in the “General” box.

Choose  “Read and Write Terminal Server license server” option from the “Permissions” list. Continue with Next.

Lastly, hit Finish from the “Completing the Delegation of Control Wizard” dialog.

Solution №3: Disable energy saving on the clients’ network cards

There has been a user’s report stating that disabling energy saving on the network cards from the clients has been the right solution for the 0x8007007a error for him. The instructions below will assist you in turning off power saving on the network cards.:

Select Start -> then select Run

Write regedit. Press Enter

There you will see a Registry editor loading. From there proceed to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\DeviceNumber

Be careful: DeviceNumber normally represents the network adapter number. In case you have only one network adapter, the DeviceNumber will be 0001.

Hit PnPCapabilities.

Find Modify from the Edit menu and click on it.

Enter 24 in the Value data box. Then proceed with selecting OK.

An important detail: Usually, a value of 0 shows you have enabled power management of the network adapter. If you enter a  value of 24, it will stop Windows 7 from disabling the network adapter.

Last of all, exit Registry Editor

How to Reset HomeKit iOS 10 Guide

This guide will teach yo how to reset and reconfigure your HomeKit on iOS 10. As with all electronic devices sometimes a simple hard reset can solve an otherwise unsolvable problem.
homekit_1

The following article will show you the way to get both devices and the general HomeKit configuration reset. Usually, this process is an easy one.

Generally, you can perform a reset in two basic ways: by pushing the physical reset button on the device itself, if available. The other possibility is to complete a reset via your controlling iOS device. Below we have discussed both possibilities. The example below will be the Philips Hue Bridge 2.0, the HomeKit authorized update to the genuine Hue Bridge system. Remember that this system is not prone to issues, it is just being used as an example to illustrate our steps.

How to Reset HomeKit iOS 10

The Guide

Hard Reset your HomeKit iOS 10 Device

In most of the cases, there will be a physical reset button located somewhere on a given device. In general, what you need to do is to push the tiny button with a pen or paperclip for 3 to 5 seconds. After that you have to release the button.
reset_homekit_2

However, the cons of performing a factory reset on any piece of your hardware is that any settings recorded on the device itself – for example, Wi-Fi details or configuration files – are going to be deleted and the device will go back to its factory state.

For instance, given that your device is the Hue Bridge, performing a factory reset is going to remove all the lights. Also, you will be required to manually add them to the hub again. The case in which it is obligatory to do a factory reset is if you get a secondhand HomeKit equipment as the devices are likely to still be connected to the last owner. Reset them right after you get them in such a case to spare yourself the stress and unpleasant situation.

Reset Your HomeKit iOS 10 Configuration

Maybe the reason why you are experiencing such an issue is some kind of hiccup with your HomeKit system itself. In case the factory reset is not the thing that can get your problem fixed, maybe you will need to reset your HomeKit configuration on the controlling iOS device.

With the introduction of iOS 10 and the corresponding HomeKit update that was released along with it, everything about how HomeKit is handled on the iOS level completely changed. The change included the location and naming of the reset feature. For example, in iOS 9, the reset feature used to be located under Settings > Privacy > HomeKit – and to be very clearly titled as ‘Reset HomeKit Configuration’.

If you are an iOS 10 user, what you need to do is to launch the Home app, from the new HomeKit dashboard.
homekit_icon_3
Bear in mind that this method could only apply to an iOS device logged into the same iCloud account as the person who set up and handles the HomeKit home. This is usually the case.

Once you have launched the Home app, select  the tiny arrow icon in the upper-left side to reach the settings menu.
homekit_4

From there scroll down to the very bottom. Then you will see the entry ‘Remove Home’.
remove_home_1

Choose this entry and after that, in the corresponding pop-up menu, hit ‘Delete’.
delete_home_6

At that moment your HomeKit home will be removed.  

Outlook PST File Location (Create/Import/Open PST Files)

This guide will help you find the Outlook PST file location, as well as how to create, import and open Outlook PST files. It works for all versions of Windows.


outlook_1

Almost everyone knows that Outlook is a service used for storing emails for every account in a personal table storage the so-called PST file. However, in order to find out the location of these files, you need to know the exact version of Outlook on your PC. Here’s where Outlook stores your files and how you can move them if you need to.

What is an Outlook PST file?

Immediately after you set up an account in Outlook, a database for each one gets created in the form of a PST file (personal table storage). There this service stores all the letters, calendar stuff, contacts, corresponding to a given account. You may change your Outlook settings so that the data in a PST file might or might not get compressed and encrypted. The more data you store in your PST file, the slower your Outlook service gets.
The extensions in your Outlook Data Folder are marked in the following way: .ost. The format of these files is the same as the one of the PST ones. The difference is that the .ost files are used as temporary offline storage of emails for Exchange servers and for various webmail hosts. For example, Gmail files get stored in .ost files.

Outlook PST File Location

The Guide

This location of these files entirely depends on the version of Outlook installed on your PC. The default file location for Outlook 2007 and 2010 is the AppData folder (at the following location):
C:\users\username\AppData\Local\Microsoft\Outlook

However, regardless of your version of Outlook, this service always stores all OST files at that same AppData address.

Ever since the introduction of Outlook 2013, the address of the PST files has been moved to the Documents directory. As a result, at the present moment Outlook 2013 and 2016 keep their PST files in the following location: C:\users\username\Documents\Outlook Files

If you want to check where Outlook stores the data for an account, you can check it from within the Outlook itself.

For users of Outlook 2010, 2013, and 2016:
Open the ‘File’ menu.
Select the ‘Account Settings’ menu.
account_information_outlook_2
After that you should go with ‘Account Settings’.

For users of Outlook 2007:
Look for the ‘Account Settings’ feature.
You can find it on the ‘Tools’ menu.

Inside the ‘Account Settings’ dialog you will see a ‘Data Files’ tab.
outlook_3
From there choose the account you need to find the PST files for.
After that hit the ‘Open File Location’ button.
Doing that will load a File Explorer window that shows the folder containing your PST file (or OST file, if you’ve chosen an account that has one).
pst_file_explorer_outlook_4

The way to change the location of a PST File

In case you want to or need to change the location of your Outlook files from your default hard disk, you should know that you can’t just move them to a different address via File Explorer. If you want to move them anyway, you will have to dive into the Windows Registry to set a new location where Outlook will store data files. After that you will be able to move your existing PST file in File Explorer.

Before we proceed with the guide below, we want to warn you not to take that task lightheartedly as Windows Registry is a powerful, but complex tool. You should always back it up before modifying anything inside it. What’s more, you should be extremely careful when you work in such a sensitive environment.

– Open the Registry Editor;
regedit_1

– Once there – you are supposed to use the left sidebar to navigate one of the keys mentioned below, (that depends on the version of Outlook you have):

Outlook 2016 : HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\

Outlook 2013 : HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\

Outlook 2010 : HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\

Outlook 2007 : HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\
registry_ed_outlook_6

– The next step is to set a different value inside the Outlook key relevant to you.
– In order to do that, right-click on the chosen Outlook key.
– Then follow these instructions: New à Expandable String Value.
– Give the new value the name ForcePSTPath.
force_pst_7
– Click twice on the newly-set ForcePSTPath value (or ForceOSTPath in case of .ost files ).
– This will  load its Properties window.
– There you should enter the address (where you would like to store new Outlook data files) into the “Value data” box.
editstringoutlook_8
– Finish that operation by hitting OK.

After that shut down the Registry Editor.
At that moment Outlook is supposed to create new PST files at the address you set. Also, you may use File Explorer to move the PST file from the previous location to the new one. When you open Outlook again, everything should work as smoothly as before.

Error Code 0x80240437 Fix (Windows 10)

This guide will teach you how to fix Windows 10 Store Error Code 0x80240437. This error code occurs when your PC can’t communicate properly with Microsoft servers.

0x80240437_error_image

The reason why you are facing Error Code 0x80240437 is that Microsoft has modified the way Windows communicates with Microsoft Store’s servers after the release of Windows 8 and subsequently Windows 10 As a result, you may often receive this error code when the OS strives to get the download process started. However, it cannot establish a connection between your PC and the Store’s servers. Therefore, your system is not able to download the applications or updates you want or need.

The potential solutions below have been designed to help you get Error Code 0x80240437 resolved. Just make sure that you follow all the instructions closely and try all the offered methods.

Error Code 0x80240437 Fix

The Guide

Error Code 0x80240437 Fix  #1: Load an elevated Powershell
powershell_image_1

The so-called Powershell represents an automation platform and scripting language that is able to run scripts to allow you to manage your systems in an easier way. Fortunately, there is a script that could help you establish a decent connection to the servers. As a result, you will be able to download applications from the store.

  1. Press the Windows key on your keyboard.
    windows_key
  2. After that, write powershell.
    powershell_dialog
  3. Right-click on the generated result.
  4. Select Run as administrator.
    run_as_admin
  5. Type the commands below into the PowerShell.
  6. Execute the commands by pushing Enter right after typing each of them.

PowerShell -ExecutionPolicy Unrestricted $manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest

AND

PowerShell -ExecutionPolicy Unrestricted -Command “& {$manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml‘ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}”

  1. Bear in mind that several errors may appear during execution , but just disregard them.
  2. When the command is done, reboot your PC. Try running the Store again and downloading your apps, you shouldn’t have any problems now.

Error Code 0x80240437 Fix #2:  Try uninstalling and reinstalling your network adapter

Follow the detailed steps in the list below:

  1. Hit the Windows and the R keys at the same time.
  2. In the generated Run dialog you should type devmgmt.
    devmgmt-msc_1
    Complete that step by pushing Enter or pressing OK.
  3. The Device Manager will be opened.
  4. There you will notice a list of devices, in which locate and expand Network Adapters.
  5. Look for your network adapter and right-click it.
  6. From the displayed options, go with Uninstall.
  7. As soon as the uninstallation process has ended, click on an empty part inside the Device Manager so that you will be able to deselect any device.
  8. Open the Action menu.
  9. From there select Scan for hardware changes.
  10. Please, note that your network adapter could have been enlisted as an Unknown device.
  11. Right-click on it. What you should do next is to go with Update Driver Software. Implement all the wizard’s steps. Doing that will automatically install the drivers for it.
  12. Finally – restart your machine.
    In the end you should be able to access the Store and download the necessary apps.

Error Code 0x80240437 Fix  #3: Rebooting the Windows Update services might help

To do that, follow the instructions we have prepared for you:

  1. Load the Run dialog.
  2. After that, what you should write there is msc.
  3. Confirm the action by hitting OK.
  4. Look for the Windows Update service and the Background Intelligent Transfer service. 
  5. Right-click on both of them and after that go with the Stop option.
  6. Press R as you are holding the Windows Key.
  7. Enter this command: %systemroot%\SoftwareDistribution\.
  8. Confirm with OK.
  9. Permanently remove everything from the folder.
  10. Load the Services window once more.
  11. Boot both BITS and Windows Update
  12. Finally, you can check whether you are still a victim of this annoying error. You shouldn’t be experiencing it anymore.

Error Code 0x80240437 Fix  #4:  Try checking the settings of your Firewall

What you should know is that in case your Firewall is ON, it could have been programmed to prevent the Windows Update from functioning; or the Windows Store from loading. This might appear to be the source of your problem (the 0x80240437 error). This is essential for all users of enterprise systems and the Surface Hub (it is able to run external firewall software that may demand that you manually install the certificates and add an exception rule for your device to connect via the Store). As a result, disabling your Firewall or changing its settings might help you resolve this error.

 

How to Crop and Edit Images – Android Guide

This guide will teach how to to crop and edit images on an Android device. The instructions work with all devices and all versions of Android.

Using your smartphone is the easiest way to take and share pictures when you are ion the move. To make any picture more noticeable, you may need to use some adjusting, cropping, and enhancing tools. Many people believe this is too hard to do on Android or that there is no suitable tools for the task. They are wrong.

As an Android user, you are quite lucky, as Google has a good set of editing features that will help you modify your photo however you want.
We must note that these features could be different because of the different versions of the Google Photos App. With the introduction of the Lollipop OS, the new Photos App has been launched as well, but there are no significant changes to the crop/resize tools. Both the old and the new version of this app provide many cool and interesting options for cropping and editing your pictures.

Here are the instructions on how to make the best use of the Photo app that comes with every Android device.:

How to Crop and Edit Images in Android

The Guide

  1. Open your image with the Photos app. There will be three buttons along the bottom. Click on the one that looks like a pencil to start the editing process.
  1. You will notice that the controls are laid out along the bottom as well.
    Find the tool that looks like a magic wand – it will automatically fix your image in terms of color, brightness, and contrast. There will also appear a Crop and a Rotate controls.
    1

* The cropping controls could be used by dragging inward from the corners.
crop_image_3

* The App also provides some pre-designed filters that you may use for modifying your image’s appearance.  In the new Photos App you can compare the new look and the previous one by tapping the rectangle with the vertical-line icon.

*To reverse what you have done to the image, hit ‘X’.

* To apply all the changes you have made, just tap the little checkmark.
4

* There are many other features like ‘Tune Image’ and ‘Selective’. You can choose them and adjust them as you wish.

* You may also use the effects that the Photos Apps provides (Vintage, Drama, Black & White, etc.). Just play with them freely. Also, you may add frames.
2

Experiments are always welcome. Play with all the features and check what you can achieve. In case you do not want to apply the changes made, you can reverse the process. In order to go back, hit the three dots in the upper-right corner. After that, go with ‘Revert’ from the list that you will see.
7

You may not have this particular version of the Google Photos App if your Android smartphone is an older one. Still, there should be a kind of a built-in photo viewer and editor.  The Gallery App could also have some useful features.
0

Also, the version of Android on  a Samsung phone, for example, may provide you with very different editing features from the one we have elaborated on above. No worries, though, they should include all these editing controls and maybe even some more.
However, we DO recommend Google Photos because of its editing features and automatic photo backup. You and your images will always be safe while using this App. No one could ever go wrong with it.
If something wrong happens, let us know in the comments. We will try to find a solution and to create an adequate guide for your certain case. Also, inform us if the article above has been any helpful! We are open for advice, suggestions, recommendations and all sorts of feedback.

How to Clear Search History on Android (Guide)

This guide will teach you how to clear Google History (delete all) on Android. These instructions work on all Android devices.

clear_search_history_1

It is often extremely embarrassing to give an acquaintance your device to search for something on the web and they see the history of your previous searches and have him mock you afterwards because of them. This happens because Google usually displays your recent search queries in the auto-complete area when someone begins to type in that search area. As it stands, it can be very handy to know how to clear google search history – to delete all or some of it.

Fortunately, we can remove the items from our Google search history in many various ways.
The first guide we have prepared for you will efficiently help you to get rid of a few particular terms quickly.The second one could be used in case you wish to remove as many of your recent search items all at once as possible.

An important tip: Check whether your Google search app has been updated. You can do that via the Google Play store. There you will see if you need to update this particular app.

How to Clear Search History on Android

The Guide

How to Delete Specific Items from Search History

In case you would like to remove only a small number of your recently used terms from your Google search history, you don’t have to log into your Google account for that purpose. You should just touch either the Google search box [in Portrait mode] or the Google icon on the left [in Landscape mode].
clear_search_history_2

When you see the Google search screen displayed, select the search box. The last items in your search history  will be shown below the search box. Hold down on the item you want to remove  in the list.
clear_search_history_3

A ‘Remove from search history’ dialog box will come up. After this happens, choose ‘OK’.
clear_search_history_4

Google Search History – Delete all

In case you need to clear a considerable number of search terms all at once from your Google history, log in to your Google account from a browser on your device.
clear_search_history_5

Select ‘Settings’ in the lower-right corner of the browser. After that, you should go with ‘History’ from the pop-up menu.
clear_search_history_6

On the “History” screen, you will see all the search items listed day by day. Also, you will see a check box button above that list (it is usually outlined in red; placed below – to the left of the ‘Remove items’ button). In order to select all the search items on the current page, hit the check box button.
clear_search_history_7

Next, click on ‘Remove items’ to get rid of all items on that page.

If you need to reach older search items and delete them, choose the ‘Older’ button above the search-terms list on the right side of your browser’s tab.

clear_search_history_8

As soon as you have deleted some of the search items on the ‘History’ screen, a notification will pop-up on your monitor. It will include the information about the number of  the search items you have removed from your history records.

Please, comment in case you have any recommendations or questions!

Groove Music Error 0x801901f4 Fix (Windows 10)

The article will help you troubleshoot and fix the Groove Music Error 0x801901f4. This error commonly occurs when there is an issue with your Windows store registration.

Reasons for getting the ‘Groove Music Error 0x801901f4

Error 0x801901F4 might be a sign of many things. The most common reason for experiencing such a problem is some kind of a driver error. This article will focus on resolving the Groove Music Error, which can occur with the 0x801901F4 error code  When it comes to this particular case, the error code points to a failed connection between the Windows Store application and Microsoft servers, meaning that there is a problem with the Windows Update.

Such an issue may appear with various Windows applications (like Groove Music); and makes the apps practically useless. Even the Mail App could be influenced by this error. In fact, such apps are not knwon for being stable. As a result, such problems are more or less anticipated, although these applications were introduced long ago.

Fortunately, we are here to offer you a potential solution. Just bear in mind that most of the fixes you can find online will deal with this issue in case it represents a driver-related problem, and not a Windows Store app error. Luckily, we have figured out how to get the problem solved in case Windows Store App is involved. The instructions below will assist you with that task.

Groove Music Error 0x801901f4 Fix

The Guide

Register the Windows Store again

In order to register the Windows Store again, you will have to enter an Administrator Command Prompt. After that you will need to apply a few commands. Simply remember to write the commands in the exact way as they are written in the steps below, because they are usually case-sensitive. It is very important to be careful while implementing the commands and make no mistakes.

  1. Push the Windows key (you will find it on your keyboard – it looks like a fragmented flag).
    windows_key
  2. Type cmd in the search bar.
    cmd_1
  3. Right-click the result (instead of opening it).
    cmd_result
  4. Select Run as administrator.
    run_as_admin
  5. Lastly, you should enter the commands below in the Command Prompt window. Follow each one by pushing Enter. By doing that you will execute them.

(1) PowerShell -ExecutionPolicy Unrestricted $manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation +

(2) ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest

  1. After implementing the two commands above, exit the Command Prompt.
  2. Then restart your computer.
  3. Check whether the problem has been resolved. In the usual case, you should have solved the issue by now.

The instructions above have proven effective at solving ‘Groove Music Error 0x801901f4’. However, in your specific case, our guide may not be the tool you need. If this applies to you, you can contact our experts via the comments section below. Make sure to briefly explain your particular situation and we will try to personally resolve it. Also, in case you have already come up with a possible solution, different from the one offered above, please don’t hesitate to share it with all the interested users by letting us know. We will be happy to include it in this article.

 

Error 0x00000709 Fix (Windows 7/10)

This guide will help you fix error “0x00000709 – “Can’t Set Default Printer Problem”. You can see this error in Windows 7 and 10 alike.

We have currently received many complaints of users, apparently experiencing  the “operation could not be completed error (0x00000709)”. Basically, this error code means that you have been unable to choose a default printer. No matter what you have done – uninstalling and reinstalling the printer’s drivers, all has appeared to be unsuccessful.

This repair guide is will work on all Windows versions. Just make sure that all the steps below are completed in a careful way. We hope you will find the information below useful and your problem will easily be solved.

error-0x00000709_error_image_1

Below is a guide with all the necessary instructions to get Error 0x00000709-  “Can’t Set Default Printer” fixed in a quick and rather easy manner.

Error 0x00000709 Fix

The Guide

  1. Type“regedit”, then hit Enter in the “Search program and files” text box. This box appears right after you hit the Windows “start button” in the lower left section of your desktop.
  2. The following step is to select the “ hkey_current_user ” on the left in the Windows registry editor.
    registry-editor_2
  3. After that, choose “Software”. The following choice you have to make is “Microsoft”. Finally, choose “Windows NT”.
  4. Still being under the “Windows NT” entry, the “Current Version” is your next choice. The following one is “Windows”.
  5. At that point, in the right-hand pane you should see an entry called “Device”. In case the value for “Device” is something different from the printer you want to make default, you should highlight “Device” with the mouse. After that push the Delete key and remove it.
  6. Reboot your machine. It should be restarted with the changed Windows System R.

As soon as your Windows desktop comes up again, you should be able to reach the “Printers” section. From there you should be able to set your printer as the default one. The error message that had up until recently been bothering you should never appear on your screen again.

The opportunity to designate a default printer is very useful and could really spare you a great amount of time in the long run. You save time by NOT having to choose your destination printer every single time you want to use one. It will already be designated and set to be the default one. You should also remember that Windows is not to be blamed for these errors. Actually, it’s the printer manufacturer’s job to deal with the corrupted entries in the Windows system registry when a user ventures into uninstalling their software.

Nevertheless, getting such an error fixed is not the most complicated task. You just have to be extremely cautious and NOT alter anything else while making your changes. Changing something by mistake might result in very serious problems with your PC. Hopefully, this information has been helpful and you have dealt with this error via using our guide.

If you have other successful solutions in mind, please use the comment section to share them with us. We will be glad to update our guide with them and make them available to all the users that may possibly need it.